The ROTOGRAIN II is available self propelled or tractor powered

• MR - roller crimping and bagging

• MM - hammer milling and bagging
  

• SR - only bagging

• SRE - bagging and extracting
  

The base machine can be attached with four different feeding/loading systems and if tractor powered 540/1000 rpm PTO

Feeding/loading - optional equipment

•   O - hopper 700 l

•   P - hopper 1200 l

•   Q - feeding auger Ø120 x 4000 hydraulically driven with a small hopper 10 x 120 cm and wheel

•   R - feeding auger in two parts, hydraulically driven: inclined Ø250 x 3700 + horizontal hopper 2500 x 800mm with wheels    for dumping trailers, two hydro engines drive the augers (horizontal and vertical)

PTO and hydraulic options

•   G - 1000 rpm PTO (standard is 540)

•   N -independent hydraulic (normally the hydro engines are driven by hydraulic hoses to connect to the tractor's links)

Augers/conveyors are powered by hydraulic engines

ROTOGRAIN II MR - MM - SR

MR - ROLLER MILL AND BAGGING - PTO

The mill unit is available in different sizes and capacities. The rolls used are 33cm diameter with standard length of 60cm, in case of special request it is possible to get rolls with length of 90cm or 120cm

The output is direct proportional to the length of the rolls and indirect proportional to the number of teeth.

The rolls available has different teeth number and must be specified at order

• 3,2 teeth/cm² for oat / barley / wheat

• 2,7 teeth/cm² for maize

In addition the rolls has induction treated teeth with 45 Rockwell and a surface chroming of 55/60 Rockwell

The shape of the teeth is different and asymmetric in order to be more aggressive on the working face. The rolls are teethed helicoildally and turns on different speed.

On special request it is also possible to install a double stack roller mill/hammer mill, depending on the particle size requested by final customer

length	width	height	weight	PTO	PTO	capacity
cm	cm	cm	kg	rpm	kW	ton/h
550	245	310	3100	540	80	10-17

MM - HAMMER MILL AND BAGGING - PTO

Bagging machine RotoGrain II Ø240/200/150 version "hammer mill"

The machine is very similar to the roller mill version but with these main differences

length	width	height	weight	PTO	PTO	capacity
cm	cm	cm	kg	rpm	kW	ton/h
550	245	301	3250	1000	120	10-17

SR - ONLY BAGGING - PTO

Bagging machine ROTOGRAIN II Ø240/200/150 version "without roller mill"

length	width	height	weight	PTO	PTO	capacity
cm	cm	cm	kg	rpm	kW	ton/h
550	245	270	2700	540	50	50-70

Attention! Technical data and equipment could be different respect the pictures shown on this brochure. The values reported are indicatives and may vary depending by APIESSE needs without commitments with the final customer

Attention! Technical data and equipment could be different respect the pictures shown on this brochure. The values reported are indicatives and may vary depending by APIESSE needs without commitments with the final customer